ZyXEL Communications HS100/HS100W manual Menu 3.2 TCP/IP and Dhcp Ethernet Setup

HomeSafe User’s Guide

First address in
the IP pool	Menu 3.2 - TCP/IP and DHCP Ethernet Setup		Size of the IP Pool
DHCP= Server		TCP/IP Setup:
					This is the IP
Client IP Pool:
Starting Address= 192.168.1.33		IP Address= 192.168.1.1			address of the
Size of Client IP Pool= 32		IP Subnet Mask= 255.255.255.		HomeSafe0
First DNS Server= From ISP		RIP Direction= Both
IP Address= N/A		Version= RIP-1
Second DNS Server= From ISP		Multicast= None
IP Address= N/A		Edit IP Alias= No
Third DNS Server= DNS Relay
IP Address= N/A			IP addresses of
DHCP Server Address= N/A			the DNS
			servers

Press ENTER to Confirm or ESC to Cancel:

Figure 20-3 Menu 3.2 TCP/IP and DHCP Ethernet Setup

Follow the instructions in the next table on how to configure the DHCP fields.

Table 20-1 Menu 3.2: DHCP Ethernet Setup Fields

FIELD	DESCRIPTION	EXAMPLE
DHCP	This field enables/disables the DHCP server.	Server
	If set to Server, your HomeSafe will act as a DHCP server.
	If set to None, the DHCP server will be disabled.
	If set to Relay, the HomeSafe acts as a surrogate DHCP server and
	relays requests and responses between the remote server and the
	clients.
	When set to Server, the following items need to be set:
Client IP Pool:
Starting Address	This field specifies the first of the contiguous addresses in the IP	192.168.1.33
	address pool.
Size of Client IP	This field specifies the size, or count of the IP address pool.	128
Pool

20-2 Menu 3 LAN Setup