ZyXEL Communications HS100/HS100W manual Screens Summary, Link TAB Function

HomeSafe User’s Guide

		Table 2-17 Screens Summary
LINK	TAB	FUNCTION
WIZARD SETUP
		Use these screens for initial configuration including general setup,
CONNECTION		Wireless LAN setup, ISP parameters for Internet Access and WAN
		IP/DNS Server/MAC address assignment.
PARENTAL		Use these screens to create user profiles, configure a user category
CONTROL		for blocking services, register for content filtering and configure time
		allowances.
ADVANCED
SYSTEM	General	This screen contains administrative and system-related information.
	DDNS	Use this screen to set up dynamic DNS.
	Password	Use this screen to change your password.
	Time Zone	Use this screen to change your HomeSafe’s time and date.
LAN	IP	Use this screen to configure LAN DHCP, TCP/IP settings and to
		enable Any IP.
	Static DHCP	Use this screen to assign IP addresses on the LAN to specific
		individual computers based on their MAC Addresses.
	IP Alias	Use this screen to partition your LAN interface into subnets.
WIRELESS	Wireless	Use this screen to configure wireless LAN.
	MAC Filter	Use the MAC filter screen to configure the HomeSafe to block
		access to devices or block the devices from accessing the
		HomeSafe.
	Roaming	This screen allows you to configure your HomeSafe roaming
		capabilities.
	802.1x/WPA	This screen allows you to configure 802.1x enhanced security
		method for both the authentication of wireless stations and
		encryption key management.
	Local User	This screen allows you to configure a database internal to the
	Database	HomeSafe.
	RADIUS	This screen allows you to configure an external RADIUS server for
		an unlimited number of users.
WAN	Route	This screen allows you to configure route priority.
	WAN ISP	Use this screen to change your HomeSafe’s WAN ISP settings.
	WAN IP	Use this screen to change your HomeSafe’s WAN IP address
		settings.
	WAN MAC	Use this screen to change your HomeSafe’s WAN MAC settings.
	Traffic Redirect	Use this screen to configure your traffic redirect properties and
		parameters.
SUA/NAT	SUA Server	Use this screen to configure servers behind the HomeSafe.
	Address	Use this screen to configure network address translation mapping
	Mapping	rules.
	Trigger Port	Use this screen to change your HomeSafe’s trigger port settings.
STATIC ROUTE	IP Static Route	Use this screen to configure IP static routes.

2-22 Introducing the Web Configurator