ZyXEL Communications HS100/HS100W manual Snmp, Remote Management FTP

HomeSafe User’s Guide

	Figure 14-4 Remote Management : FTP
The following table describes the labels in this screen.
	Table 14-3 Remote Management : FTP
LABEL	DESCRIPTION
Server Port	You may change the server port number for a service if needed, however you must
	use the same port number in order to use that service for remote management.
Server Access	Select the interface(s) through which a computer may access the HomeSafe using
	this service.
Secured Client	A secured client is a “trusted” computer that is allowed to communicate with the
IP Address	HomeSafe using this service.
	Select All to allow any computer to access the HomeSafe using this service.
	Choose Selected to just allow the computer with the IP address that you specify to
	access the HomeSafe using this service.
Apply	Click Apply to save your customized settings and exit this screen.
Reset	Click Reset to begin configuring this screen afresh.

14.6 SNMP

Simple Network Management Protocol (SNMP) is a protocol used for exchanging management information between network devices. SNMP is a member of the TCP/IP protocol suite. Your HomeSafe supports SNMP agent functionality, which allows a manager station to manage and monitor the HomeSafe through the network. The HomeSafe supports SNMP version one (SNMPv1) and version two (SNMPv2). The next figure illustrates an SNMP management operation. SNMP is only available if TCP/IP is configured.

Remote Management Screens 14-5