ZyXEL Communications HS100/HS100W manual Parental Control Application, Parental Administrator log

HomeSafe User’s Guide

Figure 12-2 User Status Window

4.You can start browsing the web from the current window, or use the link on the top of the box to open a new web browser.

¾If you close or navigate away from the status screen, you can redisplay the status screen by typing status into the address bar on your web browser and hitting enter.

5.There are five ways to be logged out of the system.

¾Click the Logout button on the status screen.

¾The idle timeout triggers the logout (the default is five minutes).

¾The access Time Allowance budget reaches zero and triggers the logout.

¾The system clock reaches the End Time for the user’s account and triggers the logout.

¾Type logout into the address bar on your web browser and hitting enter.

6.

Parental (Administrator) log in

The administrator can log into the system after the initial configuration.

1.The administrator opens their browser and is directed to the HomeSafe User Login page (this is the same as the user login).

2.The administrator enters “admin” as the username and the system password.

3.The system administrator Welcome page opens.

12.3 Parental Control Application

You can control LAN user Internet access by having an administrator configure parental control on the HomeSafe.

The parent (administrator) must create login names and passwords for each person (user) on the network. Each person must log into the system before they can gain access to the Internet. Each person’s account will hold the details of their access rights and privileges. The HomeSafe enforces these access restrictions. In the following diagram, A refers to the HomeSafe and B refers to a modem.

12-2 Parental Control