ZyXEL Communications HS100/HS100W System Management Terminal Interface Summary, Main Menu Summary

		HomeSafe User’s Guide
	Table 17-1 Main Menu Commands
Entering	Type in or press	You need to fill in two types of fields. The first requires you to type
information	[SPACE BAR], then	in the appropriate information. The second allows you to cycle
	press [ENTER].	through the available choices by pressing [SPACE BAR].
Required fields	<? > or ChangeMe	All fields with the symbol <?> must be filled in order to be able to
		save the new configuration.
		All fields with ChangeMe must not be left blank in order to be able
		to save the new configuration.
N/A fields	<N/A>	Some of the fields in the SMT will show a <N/A>. This symbol
		refers to an option that is Not Applicable.
Save your	[ENTER]	Save your configuration by pressing [ENTER] at the message
configuration		“Press ENTER to confirm or ESC to cancel”. Saving the data on the
		screen will take you, in most cases to the previous menu.
Exit the SMT	Type 99, then press	Type 99 at the main menu prompt and press [ENTER] to exit the
	[ENTER].	SMT interface.

After you enter the password, the SMT displays the main menu, as shown next.

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.

	HS-100/HS-100W Main Menu
Getting Started		Advanced Management
1.	General Setup	21.	Filter	and Firewall Setup
2.	WAN Setup	22.	SNMP Configuration
3.	LAN Setup	23.	System	Security
4.	Internet Access Setup	24.	System	Maintenance
		26.	Schedule Setup

Advanced Applications

11.Remote Node Setup

12.Static Routing Setup

14.Dial-in User Setup

15.NAT Setup

99. Exit

Enter Menu Selection Number:

				Figure 17-3 SMT Main Menu
17.2.1 System Management Terminal Interface Summary
			Table 17-2 Main Menu Summary
	#	MENU TITLE		DESCRIPTION
	1	General Setup		Use this menu to set up your general information.
	2	WAN Setup		Use this menu to clone a MAC address from a computer on your LAN.
	3	LAN Setup		Use this menu to set up your LAN and WLAN connection.
	4	Internet Access Setup		Configure your Internet Access setup (Internet address, gateway, login,
				etc.) with this menu.
	11	Remote Node Setup		Use this menu to configure detailed remote node settings (your ISP is
				also a remote node) as well as apply WAN filters.
	12	Static Routing Setup		Use this menu to set up static routes.

Introducing the SMT 17-3