ZyXEL Communications HS100/HS100W manual Displaying Logs

HomeSafe User’s Guide

Usage: [0:none/1:log/2:alert/3:both] [0:don't show debug type/1:show debug type]

4.Use sys logs category followed by a log category and a parameter to decide what to record.

Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only alerts for that category, and 3 to record both logs and alerts for that category. Not every parameter is available with every category.

5.Use the sys logs save command to store the settings in the HomeSafe (you must do this in order to record logs).

Displaying Logs

•Use the sys logs display command to show all of the logs in the HomeSafe’s log.

•Use the sys logs category display command to show the log settings for all of the log categories.

•Use the sys logs display [log category] command to show the logs in an individual HomeSafe log category.

•Use the sys logs clear command to erase all of the HomeSafe’s logs.

Log Command Example

This example shows how to set the HomeSafe to record the access logs and alerts and then view the results.

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.

HS-100W> sys logs load

HS-100W> sys logs category access 3

HS-100W> sys logs save

HS-100W> sys logs display access

# .time	source	destination	notes
message
001/01/2000 00:45:47			User:admin
Successful SMT login
101/01/2000 00:35:22			User:admin
Successful SMT login
201/01/2000 00:00:09			User:admin
Successful SMT login
HS-100W>

Log Descriptions D-5