ZyXEL Communications HS100/HS100W manual Wlan Setup Basic Security, Essid, Access screen

HomeSafe User’s Guide

	Figure 2-3 Wizard Step 2 : Wireless LAN Setup
The following table describes the fields in this screen.
	Table 2-2 Wizard Step 2 : Wireless LAN Setup
LABEL	DESCRIPTION
ESSID	Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
	If you change this field on the HomeSafe, make sure all wireless stations use the same
	ESSID in order to access the network.
Choose	To set the HomeSafe to use a channel, select a channel from the drop-down list box.
Channel ID
Security	The level of Security can be selected as none, basic or extended. Choose No security to
	have no wireless LAN security configured and proceed to the ISP Parameters for Internet
	Access screen.
	Choose Basic security if you want to configure WEP Encryption parameters.
	Choose Extend security to configure a Pre-Shared Key.
	The following screen varies depending on which security level you select.
Back	Click Back to display the previous screen.
Next	Click Next to proceed to the next screen.

2.4.1 Step 2 : WLAN Setup Basic Security

If you choose Basic, you can setup WEP Encryption parameters.

)The wireless stations and HomeSafe must use the same ESSID, channel ID and WEP encryption key for wireless communication.

Introducing the Web Configurator 2-3