ZyXEL Communications HS100/HS100W manual Configuring Roaming on the HomeSafe

HomeSafe User’s Guide

Menu 3.5.1 - WLAN MAC Address Filter

Active= No

Filter Action= Allowed Association

MAC Address Filter

Address	1= 00:00:00:00:00:00
Address	2= 00:00:00:00:00:00
Address	3= 00:00:00:00:00:00
Address	4= 00:00:00:00:00:00
Address	5= 00:00:00:00:00:00
Address	6= 00:00:00:00:00:00
Address	7= 00:00:00:00:00:00
Address	8= 00:00:00:00:00:00
Address	9= 00:00:00:00:00:00

Address 10= 00:00:00:00:00:00

Address 11= 00:00:00:00:00:00

Address 12= 00:00:00:00:00:00

Enter here to CONFIRM or ESC to CANCEL:

Figure 20-8 Menu 3.5.1 WLAN MAC Address Filter

The following table describes the fields in this menu.

	Table 20-5 Menu 3.5.1 WLAN MAC Address Filter
FIELD	DESCRIPTION
Active	To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].
Filter Action	Define the filter action for the list of MAC addresses in the MAC address filter table.
	To deny access to the HomeSafe, press [SPACE BAR] to select Deny Association and
	press [ENTER]. MAC addresses not listed will be allowed to access the router.
	The default action, Allowed Association, permits association with the HomeSafe. MAC
	addresses not listed will be denied access to the router.

MAC Address Filter

Address Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are allowed or denied access to the HomeSafe in these address fields.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

20.4.2 Configuring Roaming on the HomeSafe

Enable the roaming feature if you have two or more HomeSafe’s on the same subnet. Follow the steps below to allow roaming on your HomeSafe.

Step 1. From the main menu, enter 3 to display Menu 3 – LAN Setup.

Step 2. Enter 5 to display Menu 3.5 – Wireless LAN Setup.

20-8 Menu 3 LAN Setup