ZyXEL Communications HS100/HS100W manual Wireless LAN Setup, Both, In Only, Out Only or None

HomeSafe User’s Guide

Table 20-3 Menu 3.2.1: IP Alias Setup

FIELD	DESCRIPTION	EXAMPLE
IP Alias 1, 2	Choose Yes to configure the LAN network for the HomeSafe.	Yes
IP Address	Enter the IP address of your HomeSafe in dotted decimal notation.	192.168.1.1
IP Subnet Mask	Your HomeSafe will automatically calculate the subnet mask based	255.255.255.0
	on the IP address that you assign. Unless you are implementing
	subnetting, use the subnet mask computed by the HomeSafe.
RIP Direction	Press [SPACE BAR] and then [ENTER] to select the RIP direction.	None
	Options are
	Both, In Only, Out Only or None.
Version	Press [SPACE BAR] and then [ENTER] to select the RIP version.	RIP-1
	Options are
	RIP-1,RIP-2B or RIP-2M.
Incoming Protocol	Enter the filter set(s) you wish to apply to the incoming traffic	1
Filters	between this node and the HomeSafe.
Outgoing Protocol	Enter the filter set(s) you wish to apply to the outgoing traffic	2
Filters	between this node and the HomeSafe.

When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [ESC] at any time to cancel.

20.4 Wireless LAN Setup

Use menu 3.5 to set up your HomeSafe as the wireless access point. To edit menu 3.5, enter 3 from the main menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then press [ENTER] to display Menu 3.5 – Wireless LAN Setup as shown next.

	Menu 3.5 - Wireless	LAN Setup
ESSID= ZyXEL
Hide ESSID=	No
Channel ID=	CH06 2437MHz	Edit MAC Address Filter= No
RTS Threshold= 2432		Edit Roaming Configuration= No
Frag. Threshold= 2432
WEP Encryption= Disable		Preamble= Long
Default Key= N/A		802.11 Mode= Mixed
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
	Press ENTER to Confirm or	ESC to Cancel:

Figure 20-6 Menu 3.5 Wireless LAN Setup

The following table describes the fields in this menu.

Table 20-4 Menu 3.5 Wireless LAN Setup

FIELD	DESCRIPTION	EXAMPLE
ESSID	The ESSID (Extended Service Set IDentity) identifies the AP to which	Wireless
	the wireless stations associate. Wireless stations associating to the

Menu 3 LAN Setup 20-5