ZyXEL Communications HS100/HS100W manual Chapter System Maintenance, Command Interpreter Mode

HomeSafe User’s Guide

Chapter 32

System Maintenance

This chapter leads you through SMT menus 24.8 to 24.10.

32.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu when finished.

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Firmware Update

8.Command Interpreter Mode

9.Call Control

10.Time and Date Setting

11.Remote Management Setup

Figure 32-1 Command Mode in Menu 24

32.1.1 Command Syntax

The command keywords are in courier new font.

Enter the command keywords exactly as shown, do not abbreviate.

The required fields in a command are enclosed in angle brackets <>.

The optional fields in a command are enclosed in square brackets [].

The symbol means “or”.

For example,

sys filter netbios config <type> <onoff>

means that you must specify the type of netbios filter and whether to turn it on or off.

32.1.2 Command Usage

A list of commands can be found by typing help or ? at the command prompt. Always type the full command. Type exit to return to the SMT main menu when finished.

System Maintenance 32-1