ZyXEL Communications HS100/HS100W manual Accessing the Internet via the HomeSafe Gateway

HomeSafe User’s Guide

Figure 2-23 Content Filter Activation Failure

2.7.1 Content Filter Setup Complete

Well done! You have finished configuration of Content Filter Service Activation. You may now click Close to finish using the setup wizard and close your browser.

Figure 2-24 Content Filter Setup Complete

)To use the HomeSafe content filtering you must enable and configure Pre-defined Web Content Categories in the ADVANCED Parental Control group edit configuration screen.

2.8Accessing the Internet via the HomeSafe Gateway

If you are satisfied with the initial setup, you can access the Internet by following the steps below.

You must first log into the HomeSafe to allow your computer on the network to gain Internet access.

1.When you open your browser, you are directed to the HomeSafe’s User Login page.

2.By entering your login name and password the device checks the access profile and begins enforcing the access control restriction as defined by the administrator.

3.The access privileges remain in force until you log out.

4.After a successful login, the system displays a window that will display the budget time remaining, a logout button, and a link to open a new browser window to begin Internet surfing.

5.When done using the Internet, or to log-in another user, click the logout button or type logout in your web browsers address bar.

Introducing the Web Configurator 2-19