ZyXEL Communications HS100/HS100W manual Call Control Support, Budget Management

HomeSafe User’s Guide

HS-100W> com
Valid commands are:
sys	exit	device	ether
poe	pptp	config	wlan
ip	ppp	bridge	parentCtrl
radius	8021x
HS-100W>

Figure 32-2 Valid Commands

32.2 Call Control Support

The HomeSafe provides two call control functions: budget management and call history. Please note that this menu is only applicable when Encapsulation is set to PPPoE in menu 4 or menu 11.1.

The budget management function allows you to set a limit on the total outgoing call time of the HomeSafe within certain times. When the total outgoing call time exceeds the limit, the current call will be dropped and any future outgoing calls will be blocked.

To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 — System Maintenance — Call Control, as shown in the next table.

Menu 24.9 - System Maintenance - Call Control

1.Budget Management

2.Call History

Figure 32-3 Menu 24.9 System Maintenance : Call Control

32.2.1 Budget Management

Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1 from Menu 24.9 - System Maintenance - Call Control to bring up the following menu.

	Menu 24.9.1 - Budget Management
Remote Node	Connection Time/Total Budget	Elapsed Time/Total
1. MyISP	No Budget	Period
		No Budget

Reset Node (0 to update screen):

Figure 32-4 Budget Management

The total budget is the time limit on the accumulated time for outgoing calls to a remote node. When this limit is reached, the call will be dropped and further outgoing calls to that remote node will be blocked. After each period, the total budget is reset. The default for the total budget is 0 minutes and the period is 0 hours, meaning no budget control. You can reset the accumulated connection time in this menu by entering the index of a remote node. Enter 0 to update the screen. The budget and the reset period can be configured in menu 11.1 for the remote node.

32-2 System Maintenance