ZyXEL Communications HS100/HS100W manual Applying Schedule Sets to a Remote Node PPPoE

HomeSafe User’s Guide

Table 34-1 Menu 26.1 Schedule Set Setup

FIELD	DESCRIPTION	EXAMPLE
Action	Forced On means that the connection is maintained whether or not there	Forced On
	is a demand call on the line and will persist for the time period specified in
	the Duration field.
	Forced Down means that the connection is blocked whether or not there
	is a demand call on the line.
	Enable Dial-On-Demandmeans that this schedule permits a demand call
	on the line. Disable Dial-On-Demandmeans that this schedule prevents
	a demand call on the line.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as shown next.

Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP	Route= IP
Active= Yes
Encapsulation= PPPoE	Edit IP= No
Service Type= Standard	Telco Option:		Apply your
Service Name=	Allocated Budget(min)=
		0
Outgoing:	Period(hr)= 0		schedule sets
			here
My Login=	Schedules= 1,2,3,4
My Password= ********	Nailed-Up Connection=
		No
Retype to Confirm= ********
Authen= CHAP/PAP
	Session Options:
	Edit Filter Sets= No
	Idle Timeout(sec)= 100
	Edit Traffic Redirect= No
Press ENTER to Confirm or ESC to Cancel:

Figure 34-3 Applying Schedule Set(s) to a Remote Node (PPPoE)

You can apply up to four schedule sets, separated by commas, for one remote node. Change the schedule set numbers to your preference(s).

Call Scheduling 34-3