ZyXEL Communications HS100/HS100W Configuring Telnet, Telnet Configuration on a TCP/IP Network

	HomeSafe User’s Guide
	Table 14-1 Remote Management : WWW
LABEL	DESCRIPTION
Server Access	Select the interface(s) through which a computer may access the HomeSafe using
	this service.
Secured Client	A secured client is a “trusted” computer that is allowed to communicate with the
IP Address	HomeSafe using this service.
	Select All to allow any computer to access the HomeSafe using this service.
	Choose Selected to just allow the computer with the IP address that you specify to
	access the HomeSafe using this service.
Apply	Click Apply to save your customized settings and exit this screen.
Reset	Click Reset to begin configuring this screen afresh.

14.3 Configuring Telnet

You can configure your HomeSafe for remote Telnet access as shown next. The administrator uses Telnet from a computer on a remote network to access the HomeSafe.

Figure 14-2 Telnet Configuration on a TCP/IP Network

14.4 Configuring TELNET

Click REMOTE MGMT and the TELNET tab to display the screen as shown.

Remote Management Screens 14-3