ZyXEL Communications HS100/HS100W manual Configuring IP Alias, LAN IP Alias

	HomeSafe User’s Guide
	Table 5-2 LAN : Static DHCP
LABEL	DESCRIPTION
#	This is the index number of the Static IP table entry (row).
MAC Address	Type the MAC address (with colons) of a computer on your LAN.
IP Address	This field specifies the size, or count of the IP address pool.
Apply	Click Apply to save your changes back to the HomeSafe.
Reset	Click Reset to begin configuring this screen afresh.

5.7Configuring IP Alias

IP Alias allows you to partition a physical network into different logical networks over the same Ethernet interface. The HomeSafe supports three logical LAN interfaces via its single physical Ethernet interface with the HomeSafe itself as the gateway for each LAN network.

To change your HomeSafe’s IP Alias settings, click LAN, then the IP Alias tab. The screen appears as shown.

		Figure 5-4 LAN : IP Alias
The following table describes the labels in this screen.
		Table 5-3 LAN : IP Alias
	LABEL	DESCRIPTION
	IP Alias 1,2	Select the check box to configure another LAN network for the HomeSafe.
	IP Address	Enter the IP address of your HomeSafe in dotted decimal notation.
	IP Subnet Mask	Your HomeSafe will automatically calculate the subnet mask based on the IP
		address that you assign. Unless you are implementing subnetting, use the subnet
		mask computed by the HomeSafe.

LAN Screens 5-7