ZyXEL Communications HS100/HS100W manual Address Translation field in menu 4 or menu 11.3

HomeSafe User’s Guide

		Figure 25-14 NAT Example 3
Step 1.	In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address
	Mapping Sets. Therefore you must choose the Full Feature option from the Network
	Address Translation field (in menu 4 or menu 11.3) in
Step 2.	Figure 25-15.
Step 3. Then enter 15 from the main menu.
Step 4. Enter 1 to configure the Address Mapping Sets.
Step 5.	Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action
	and then enter 1 for the Select Rule field. Press [ENTER] to confirm.
Step 6.	Select Type as One-to-One(direct mapping for packets going both ways), and enter
	the local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP
	as 10.132.50.1 (our first IGA). (See
Step 7.	Figure 25-16).
Step 8.	Repeat the previous step for rules 2 to 4 as outlined above.
Step 9.	When finished, menu 15.1.1.1 should look like as shown in Figure 25-17.
		Menu 11.3 - Remote Node Network Layer Options
		IP Address Assignment= Dynamic
		IP Address= N/A
		IP Subnet Mask= N/A
		Gateway IP Addr= N/A
		Network Address Translation= Full Feature
		Metric= 1
		Private= N/A
		RIP Direction= None
		Version= N/A
		Multicast= None
		Enter here to CONFIRM or ESC to CANCEL:

Figure 25-15 Example 3: Menu 11.3

The following figures show how to configure the first rule.

NAT 25-9