RAD Data comm Guide to ASMi 52 Modem Configuration and Management Software

Chapter 4 ConfigurationInstallation and Operation Manual

	•
Note	The physical port alarms are described in Chapter 5.
	2. Type N to display the next page.

Accessing the Remote ASMi-52

Accessing the remote ASMi-52 is performed using a virtual connection with your terminal physically connected to the local unit.

To access the remote ASMi-52

1.From the Monitoring menu (Figure 4-38), select Open Virtual Connection (Main menu > Monitoring > Open Virtual Connection).

2.The Login screen of the second ASMi-52 appears.

3.Login to the second ASMi-52.

You now have access to the second ASMi-52 menus.

Note	•
	If no key press is sensed for a period of 10 minutes, the virtual connection closes
	and you are returned to the initial ASMi-52.

To close a virtual terminal

•From the Monitoring menu of the second ASMi-52, select Close Virtual Connection.

The Main menu of the first ASMi-52 is displayed.

Entering the User Name and Password

Once you have installed the ASMi-52 modems at the central and remote locations, and have completed the installation and operation procedures described in Chapter 2 and Chapter 3, you can start a control session.

You have to enter a user name and password in order to start the ASMi-52 management software (see Figure 4-41and Figure 4-42).

ASMi-52

USER NAME:

PASSWORD:

Figure 4-41. Password Request Screen (Terminal Session)

4-38 Additional Tasks ASMi-52 Ver. 2.5