RAD Data comm Resetting ASMi-52, Switching the Software Versions, To swap software versions

Installation and Operation Manual			Chapter 4 Configuration
	SW files	ASMi-52
	Software active version:	Local	Remote
		(2.01E24)	(2.02000)
	Software active partition:	(0)	(0)
	Code size:	(813110)	(813161)
	Date:	(28-7-4)	(2-8-4)
	Software backup version:	(2.01E24)	(2.01E11)
	Software backup partition:	(1)	(1)
	Code size:	(813110)	(809233)
	Date:	(28-7-24)	(9-6-4)
	Boot version:	(1.10)	(1.10)
	Boot mng version:	(5.34)	(5.34)
	Press any key to continue...
	ESC-prev. menu; !-main menu; &-exit

Figure 4-48. Software Version Screen

Switching the Software Versions

If an active software becomes corrupted, you can switch it with the backup in the local ASMi-52 units.

To swap software versions:

1.From the File System menu, select the SWAP Local SW Files (Main menu > File Utilities > File System > Swap Local SW Files) to swap files in the local ASMi-52.

ASMi-52 displays the following message:

Request to swap SW files!!! Confirm Y/N

2. Type Y to confirm the file swap.

ASMi-52 performs the swap and sends the following string:

Program Switching

The active software becomes the backup and vice versa. At this stage,

ASMi-52 is automatically reset.

If you try to switch the software versions when only one version is available,

ASMi-52 responds with the following message:

Impossible to switch – no other program

Press any key to continue

Resetting ASMi-52

ASMi-52 supports four types of reset:

•Reset to the default setting

•SHDSL interface reset

•SHDSL repeater line reset

•Overall reset.

ASMi-52 Ver. 2.5 Additional Tasks 4-45