RAD Data comm manual Turning Off ASMi-52, Logging Out, To end the current session

Chapter 3 Operation Installation and Operation Manual

Logging Out

Note

To end the current session:

•In the Main menu, click Logout or type & in a terminal management screen.

•

•ASMi-52 allows at least four management sessions to be active at a time. If the Web-based management sessions were not ended properly (for example, by closing the Web browser window), you have to wait five minutes before attempting the next log-in. If you try to log in during the five-minute security timeout, ASMi-52 does not allow to proceed to the Main menu, displaying ‘Too Many Users’ message. Likewise, the Web-based management session cannot be initiated, if a terminal or Telnet session is still in progress.

•One session is always reserved as a terminal session from the four available management sessions, the other three sessions can be a ConfiguRAD or Telnet sessions. The four sessions can function at the same time.

3.5 Turning Off ASMi-52

To turn off ASMi-52:

•Remove the power cord from the power source.

3-14 Turning Off ASMi-52 ASMi-52 Ver. 2.5