RAD Data comm ASMi-52 manual Package Contents, Connecting the Interface Cables

Chapter 2 Installation and Setup Installation and Operation Manual

Allow at least 90 cm (36 in) of frontal clearance for operation and maintenance accessibility. Allow at least 10 cm (4 in) clearance at the rear of the unit for signal lines and interface cables.

The ambient operating temperature of ASMi-52 should be 0° to 50°C (32° to 122°F), at a relative humidity of up to 90%, non-condensing.

2.3 Package Contents

The ASMi-52 package includes the following items:

•One ASMi-52 unit

•Technical documentation CD

•Power connection accessories (depending on which power option was ordered):

Power cord (VAC) and AC/DC plug (-48 VDC)

Terminal block kit (24 VDC)

•CBL-RJ45/2BNC/E1 adapter cable for unbalanced E1 interface (if ordered)

•RM-33 rack mount kit for the plastic case unit (if ordered)

•RM-35 rack mount kit for the metal case unit (if ordered)

2.4 Connecting the Interface Cables

Figure 2-1illustrates the rear panel of ASMi-52 in a plastic enclosure with a 4-wire line interface, E1 DTE interface, user LAN interface, alarm relay port and the control port.

Figure 2-2illustrates the rear panel of ASMi-52 in a metal enclosure with a 4-wire line interface, the user LAN interface, and the control port.

		TX	RX		LINE	LINE	DCE
	ALARM				B	A
		1 2	4	5	1 2	4 5
LINK	ACT	E1/T1			SHDSL
	CONTROL						V.35

Figure 2-1. ASMi-52 Rear Panel (Plastic Enclosure)

LINK

ACT CONTROL

LINE LINE

B A 1 2 4 5

SHDSL

Figure 2-2. ASMi-52 Rear Panel (Metal Enclosure)

2-2 Connecting the Interface Cables ASMi-52 Ver. 2.5