RAD Data comm ASMi-52 manual Deactivating the Loopbacks, To deactivate a running loopback

Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics

To activate the remote loopback at the SHDSL repeater:

1.From the Diagnostics menu, select Repeater Test (Main menu > Diagnostics > Repeater Test).

The Repeater Test menu appears (see Figure 6-26).

2.From the Repeater Test menu, select Repeater Number and choose a repeater when you intend to activate the RLB Network.

3.From the Repeater Test menu, select RLB Network.

The RLB Network value in parenthesis changes to ON. Also, an additional parameter, Loop Timeout, is displayed.

4.Once you selected the loopback timeout, select Save to activate the RLB Network.

The RLB at the repeater is initiated.

Local

DTE

	Local ASMi-52
Data
Clock	Transmit
	Glue	Line
	Logic	Interface
Data
Clock	Receive

Repeater 1

Network	Customer
Interface	Interface

Repeater 2
Network	Customer
Interface
	Interface

Figure 6-25. Remote Digital Loopback at the SHDSL Repeater

	ASMi-52
Repeater Test
1.	RLB Network	(ON)
2.	Loop Timeout(min)[0 - 4095]	... (5)
3.	Repeater number	> (1)
4.	Save

>

ESC-prev. menu; !–main menu ; &–exit

Figure 6-26. Repeater Test Menu

Deactivating the Loopbacks

To deactivate a running loopback:

•From the Local or Remote Test menu, type the number corresponding to the loopback in progress to change its value from ON to OFF and choose Save.

The TST indicator turns off.

ASMi-52 Ver. 2.5 Testing ASMi-52 6-23