RAD Data comm ASMi-52 manual Installation, Package Contents, Connecting the Interface Cable

Appendix C Easy Config Device Installation and Operation Manual

C.3 Installation

Package Contents

The Easy Config package contains the following items:

•Easy Config device

•AC/DC power adapter

•Interface cable with DB-9 male and female connectors.

Connecting the Interface Cable

The control port of the Easy Config terminates in a D-type 9-pin male connector.

To connect the Easy Config to ASMi-52:

1.Connect the female connector of the supplied interface cable to the Easy Config port designated CONSOLE.

2.Connect the male connector of the interface cable to the ASMi-52 port designated CONTROL.

Connecting the Power

Power is supplied to the Easy Config via an external AC/DC power supply or via four AA non-rechargeable batteries.

To reduce the risk of electric shock and fire, use only AC/DC power adapters supplied with the unit.

Warning

To connect the external power adapter:

1.Push the external power adapter plug into the round DC socket designated 5V, 1A DC.

2.Connect the external AC/DC power adapter to the mains outlet.

To insert batteries:

1.Loosen the four screws on the back cover of the Easy Config.

2.Remove the back cover by lifting it straight up.

3.Insert four AA non-rechargeable batteries into the battery compartment.

4.Replace the back cover by reversing the procedure described in steps 1–2.

C-2 Installation ASMi-52 Ver. 2.5