RAD Data comm ASMi-52 manual To change the user name and password

Installation and Operation Manual			Chapter 4 Configuration
	Terminal		ASMi-52
	1.	Change access	>
	2.	POP ALARM	(No)
	3.	Security timeout	(10 min)
	4.	Save
	>
	ESC-prev. menu; !-main menu; &-exit; @-scroll

Figure 4-24. Terminal Menu

To change the user name and password:

1.From the Terminal menu, select Change Access (Main menu > Configuration > System Configuration > Control Port > Port Control > Terminal > Change Access).

The following dialog appears:

Change Access		ASMi-52
		...()
1.	User name
2.	Password ...	...
3.	Clear User Name
4.	Clear Password	...
>

ESC-prev. menu; !-main menu; &-exit; @-scroll

Figure 4-25. Change Access Menu

2.Select User Name to enter a new user name; select Password to enter a new password; select Clear User Name to delete the current user; or Clear Password to delete the current password.

3.Enter a new user name or password and press <Enter>.

The Terminal menu appears.

4. From the Terminal menu, select Save to save the changes.

To enable or disable the pop-up alarms:

When the pop-up function is enabled, ASMi-52 displays the active alarms at the bottom of the terminal screen. When the faulty condition causing the alarm is cleared, the alarm is removed from the screen

1.From the Terminal menu, select Pop Alarm (Main menu > Configuration > System Configuration > Control Port > Port Control >Terminal > Pop Alarm) to choose the pop-up alarms mode: ON (pop-up alarms are enabled) or OFF (pop-up alarms are disabled).

The display is refreshed and the new value appears.

2.Select Save to save the changes.

ASMi-52 Ver. 2.5 Configuring ASMi-52 System Parameters 4-19