RAD Data comm ASMi-52 manual Applications, Unit Enclosure

Chapter 1 Introduction Installation and Operation Manual

Unit Enclosure

ASMi-52 is available in a plastic, metal, or rail-mount enclosure.

Applications

Figure 1-1illustrates a typical ASMi-52 application, in which standalone modems operate opposite each other. Figure 1-2shows ASMi-52 units operating opposite a centrally located DXC rack. Figure 1-3shows ASMi-52 modems operating opposite a centrally located LRS-24 rack.

The following multiplexer applications are supported:

•A multiplexer unit opposite the same type of multiplexer unit

•A DXC opposite multiplexer units (the multiplexer unit is a CPE), where the DXC supports a multiplexer (the CPE is the receive clock source)

•A multiplexer unit configured as a single unit opposite a single unit (where a multiplexer unit is configured as a single unit)

•A multiplexer unit opposite an E1 unit, where the single or multiplexer unit is configured as an E1 single unit.

Figure 1-1. Standalone Modem Application

1-2 Overview ASMi-52 Ver. 2.5