RAD Data comm manual Managing ASMi-52 via Web Browser

Chapter 3 Operation Installation and Operation Manual

session over the dedicated timeslot has priority over management via the 10/100BaseT port.

1.Connect the E1/T1 line to the ASMi-52 E1 or T1 port.

2.Start a terminal management session and do the following:

Assign an IP address and an IP mask to the dedicated timeslot interface

Enable DTS management

Assign an E1/T1 timeslot for the management traffic.

3.Run an SNMP management application, such as RAD’s RADview, open Telnet session, or manage ASMi-52 via ConfiguRAD.

Figure 3-9. Managing ASMi-52 via LAN Port and a Dedicated Timeslot

Managing ASMi-52 via Web Browser

ConfiguRAD is a Web-based remote access terminal management software. It provides a user-friendly interface for configuring, collecting statistics, and performing diagnostic tests on the ASMi-52 units.

To choose an option:

1.Click a link in the ConfiguRAD screen to display the next menu.

2.Once the target screen is displayed, select a value from the drop-down box or enter a value in a text box.

Some of the ASMi-52 menus have a 'Save' option. When choosing options from these menus, you must confirm your choice by selecting 'Save', otherwise your entry will be ignored.

At the left-hand bottom corner, ConfiguRAD provides some auxiliary management tools:

•Status – shows the number of users currently managing ASMi-52

3-10 Configuration Alternatives ASMi-52 Ver. 2.5