Installation and Operation Manual

Appendix C Easy Config Device

 

 

5.Repeat steps 3–4 to complete the selection. Use the s character as a space

Use the ESC button to delete the last entered character.

6.Press the ENTER button to accept selected values.

7.If an invalid value is entered, Error Reconfigure message is displayed on the LCD. Press the ESC button to return to the previous menu.

8.When it is necessary to confirm or cancel the selected action (for example, when resetting the unit), follow steps 3–4 to choose y or n from the available character list and press the ENTER button to accept the selection.

For example:

To assign 111.222.33.44 IP address to the ASMi-52 host via the Easy Config:

1.Move the cursor to the Host IP Address menu (Configuration > System Configuration > Management > Host IP).

2.Press the ENTER button.

The following display appears:

enter –.–.–.–.–.–

3. Hold down the z button, and press the x button several times.

Display scrolls through the available characters and numbers in the top row of the LCD.

0

4.Keep on holding the z button, until the desired value is displayed, then press the x button to select the value.

The selected value is displayed in the bottom row of the LCD.

1

1

5.Press the x button two more times to complete the first portion of the host IP address.

1

111

6. Hold down the z button, until s is displayed in the top row.

s 111

ASMi-52 Ver. 2.5

Operation

C-5

Page 171
Image 171
RAD Data comm ASMi-52 manual Hold down the z button, until s is displayed in the top row