RAD Data comm manual Resetting to Default Settings, Resetting the ASMi-52 Modem

Chapter 4 Configuration Installation and Operation Manual

Resetting to Default Settings

You can reset the local or remote ASMi-52 to its default settings. Resetting to the factory default does not affect the master clock setting. In addition, you can reset the local ASMi-52 without affecting its management parameters (IP address, mask and default gateway).

To reset ASMi-52 to the factory default:

1.From the System Configuration menu, select Factory Default. (Main menu > Configuration > System Configuration > Factory Default).

The Factory Default menu is displayed (Figure 4-49).

Factory default		ASMi-52
		(1)
Remote unit number
1.	Local factory default	...
2.	Remote factory default	...
3.	Local factory default W/O MNG ...
4.	Remote factory default W/O MNG ...
>

ESC - prev. menu ; ! – main menu ; & – exit

Figure 4-49. Factory Default Menu

2. From the Factory Default menu, perform one of the following steps:

	Select Local Factory Default to reset the local ASMi-52.
	Select Remote Factory Default to reset the remote device.
	Select Local Factory Default W/O MNG to reset all parameters, except for
	the IP address, mask, default gateway and the manager list of the local
	ASMi-52.
	Select Remote Factory Default W/O MNG to reset all parameters, except
	for the IP address, mask, default gateway and the manager list of the
	remote ASMi-52.
Note
	•
	Local/Remote Factory Default W/O MNG parameters are available only for the
	units equipped with the management LAN port.
	ASMi-52 displays the following message:
	Request to factory default !!! Confirm Y/N
	3. Type Y to confirm the reset.
	ASMi-52 resets all configuration parameters, except for the master clock
	(and IP values), to their default settings and restarts the system.

Resetting the ASMi-52 Modem

You can reset the SHDSL interface of the modem or repeater, or perform the overall reset of the modem.

To reset the SHDSL interface or perform the overall device reset:

1. From the System Configuration menu, select Reset. The Reset menu appears (see Figure 4-50).

4-46 Additional Tasks ASMi-52 Ver. 2.5