RAD Data comm ASMi-52 manual Physical Description, Functional Description, Statistics Collection

Chapter 1 Introduction Installation and Operation Manual

Note

Statistics Collection

ASMi-52 supports SHDSL and E1/T1 statistics collection.

Alarm Reporting

ASMi-52 alarms are relayed via a dedicated 6-pin terminal block connector.

SHDSL Repeaters

Up to eight SHDSL repeaters can be installed in line to increase the operation range of the modem. ASMi-52 provides basic management of the repeaters.

SHDSL repeaters do not support ASMi-52 T1 products.

1.2Physical Description

Figure 1-4shows a 3D view of the ASMi-52 unit in the plastic enclosure.

Figure 1-4. ASMi-52, 3D View

The front panel includes several LEDs, which display the status of power, data flow and provide diagnostics. For a detailed description of the front panel, see Chapter 3.

The rear panel includes an AC/DC power connector, a DTE connector, a line connector, a 10/100BaseT port, a V.24 terminal connector, and an alarm relay port. The ASMi-52 rear panel is described in greater detail in Chapter 2.

1.3Functional Description

This section provides a functional description of ASMi-52 in the form of block diagrams (Figure 1-5and Figure 1-6).

1-10 Functional Description ASMi-52 Ver. 2.5