Festool PI574342 General safety rules, Table of contents, Safety rules, Electrical safety

Table of contents			2) Electrical safety
			a) Power tool plugs must match the out-
Safety rules		4
			let. Never modify the plug in any way. Do
Technical data		6
			not use any adapter plugs with earthed
Symbols		6	(grounded) power tools. Unmodified plugs
Functional description		6	and matching outlets will reduce risk of elec-
			tric shock.
Use for intended purpose		6
			b) Avoid body contact with earthed or
Electrical connection		6
			grounded surfaces such as pipes, radia-
Switching the machine on and off		6
			tors, ranges and refrigerators. There is an
Tool settings		7
			increased risk of electric shock if your body is
Electronic control		7	earthed or grounded.
Chips extraction		7	c) Do not expose power tools to rain or
Milling cutters		8	wet conditions. Water entering a power tool
Clamping collet changing		8	will increase the risk of electric shock.
			d) Do not abuse the cord. Never use the
Adjusting the milling depth		8
			cord for carrying, pulling or unplugging
Working with the router		9
			the power tool. Keep cord away from
Support of the workpieces		9
			heat, oil, sharp edges or moving parts.
Aluminium processing		9
			Damaged or entangled cords increase the risk
Freehand routing		9	of electric shock.
Routing with the parallel guide		9	e) When operating a power tool outdoors,
Routing with the FS guide system		10	use an extension cord suitable for out-
Copy cutting		10	door use. Use of a cord suitable for outdoor
Accessories, tools		11	use reduces the risk of electric shock.
			f) Hold power tool by insulated gripping
Servicing and maintenance		11
			surfaces only, when performing an op-
Warranty		12
			eration where the cutting accessory may
			contact hidden wiring or its own cord.
Safety rules
			Contact with a „live“ wire will make exposed
			metal parts of the power tool „live“ and shock
	Read and understand all in-
structions. Failure to follow all instruc-			the operator.
tions listed below may result in electric			3) Personal safety
shock, fire and/or serious personal in-
jury.			a) Stay alert, watch what you are doing
SAVE THESE INSTRUCTIONS			and use common sense when operating a
			power tool. Do not use a power tool while
			you are tired or under the influence of
General safety rules			drugs, alcohol or medication. A moment of
			inattention while operating power tools may
1) Work area safety			result in serious personal injury.
			b) Use safety equipment. Always wear
a) Keep work area clean and well lit. Clut-
			eye protection. Safety equipment such as
tered and dark areas invite accidents.			dust mask, non-skid safety shoes, hard hat,
b) Do not operate power tools in explo-			or hearing protection used for appropriate
sive atmospheres, such as in the pres-			conditions will reduce personal injuries.
ence of flammable liquids, gases or dust.			c) Avoid accidental starting. Ensure the
Power tools create sparks which may ignite			switch is in the off position before plug-
the dust or fumes.			ging in. Carrying power tools with your finger
c) Keep children and bystanders away			on the switch or plugging in power tools that
while operating a power tool. Distractions			have the switch on invites accidents.

can cause you to lose control.

4