DeWalt WP54AG manual Outdoor, Distance, Slot Time, ACK Timeout, CTS Timeout

Step 5:

You can enter the parameters according to the recommended values in the pop-up window, click on the Apply button to update the changes.

This table describes the parameters that can be modified in the Long Distance Parameters page.

Parameters	Description
Outdoor	The Outdoor parameter is disabled by default. If set to
	Enable, the Outdoor parameters will be configured for
	outdoor communication over short or long distances as
	specified.
Distance	This parameter determines the distance between your
	access point and the remote access point. It should be
	entered in meters.
Slot Time	Time is slotted and each unit of time is called one slot
	time.
ACK Timeout	This parameter determines the timeout allowed for the
	sending client to receive the acknowledgment response
	from the receiving client. If no acknowledgment packet
	is received within this period, the sender will assume the
	receiver has not received the packet and will attempt to
	re-send.
CTS Timeout	This Clear-to-Send time is the time the wireless sender will
	wait for a CTS packet signaling that the channel is idle
	and it can start data transmission. If no CTS packet is
	received within this period, the sender will assume the
	channel is busy and will wait before trying to send again.

119