DeWalt WP54AG manual For WPA2- Enterprise, For WPA- Enterprise -AUTO

Step 3:

By default, the value for Accounting Port is 1813. You can leave this value as it is. This value must be set to be the same as the one in the RADIUS server.

Step 4:

Enter the Shared Secret Key used to validate client-server RADIUS communications.

Step 5:

Select the length of each encryption key:

!64- bit

10 hexadecimal or 5 ASCII Text

!128-bit

26 hexadecimal or 13 ASCII Text

Step 6:

For WPA-Enterprise

Set the Cipher Type to TKIP.

WPA replaces WEP with a strong encryption technology called Temporal Key Integrity Protocol (TKIP) with Message Integrity Check (MIC).

For WPA2- Enterprise

Set the Cipher Type to AES.

Advanced Encryption Standard (AES) is a symmetric 128-bit block data encryption technique. It is a requirement of WPA2 under the IEEE 802.11i standard.

For WPA- Enterprise -AUTO

Set the Cipher Type to Auto to allow the access point to automatically detect the cipher type to use.

101