DeWalt WP54AG manual Committed Rate

This table describes the parameters that can be modified in the Add Bandwidth Control Entry page.

Parameters		Description
Rule Name		The rule describes the type of bandwidth traffic to be controlled
		and of a specification of what action to take when that
		bandwidth traffic is encountered.
Committed	Rate	This is the minimum bandwidth rate at which a user can get the
(kbit)		throughput.
Ceiling Rate (kbit)		This is the capped bandwidth rate to limit a user’s throughput.
Rule Type		This is the type of rule depending on which IP or MAC address to
		use to download or upload a user’s throughput.
IP/MAC Address		This is the type of address to be chosen depending on the rule
		type. For instance, if you may want to limit an entirely machine
		address or a user by his router’s MAC address, you can specify
		the MAC address using that field in the same way that you can
		limit by IP address.

Step 3:

After you have completed the parameters, click Add so that the new rule is added in the entry list shown in Step 1. To add more new bandwidth rules, repeat Step 1 through 3.

NOTE

The sum of Committed Rate of the rules should never exceed the corresponding Total Rate.

133