Step 2:
By default, Bandwidth Control is disabled. Select Enable, followed by clicking the Apply button.
TO CONFIGURE WAN BANDWIDTH CONTROL SETTING
The access point can allow you to limit the entire throughput by configuring the Upload / Download Bandwidth Setting option. These values should be set to a positive integer indicating the maximum number of kilobytes transferred per second that will be allowed. The value of zero means unlimited.
For example, if you configure the Upload Total Rate to be 640kb/sec (80KB/sec), then the access point will send out packets by this speed no matter how many clients/users are connected to it.
Step 1:
Under the CONFIGURATION command menu, click on Bandwidth Control to select WAN Bandwidth Control Setup.
Step 2:
The values for the Download Total
Rate and Upload Total Rate
Bandwidth Control are preset to zero. The value of zero indicates no limit and is the default. Key in the desired values, followed by clicking the Apply button.
131
