DeWalt WP54AG manual To Configure URL Filtering

URL FILTERING

The access point supports URL Filtering, which allows you to easily set up rules to block objectionable web sites from your LAN users.

TO CONFIGURE URL FILTERING

Step 1:

Under the Security Configuration command menu, click on URL Filtering.

Step 3:

Select Block or Allow, and then click on the Apply button. The default is Disabled, which allows all websites to be accessed.

When you will be returned to the page shown above, then click the Add button.

Step 2:

You may now define the URL Filter Type by clicking the Change button.

Step 4:

For the Host Name field, input the web site address that you wish to block. Then click the Add button to complete your setup.

154