HP UX Manpages manual Usr/sbin/exportfs -av, Addnewclient -s Ignite-UXServer-n

	add_new_client(1M)	add_new_client(1M)
	/usr/sbin/exportfs -av
	International Code Set Support
	Ignite-UX uses a variety of system commands to accomplish its functionality. Because the output of many
	of these commands is parsed, Ignite-UX ensures that the POSIX locale is normally used by modifying
	environment variables. Help text and some command output not parsed by Ignite-UX will be left in the
	user's speci®ed locale.
A aA	RETURN VALUE
	add_new_client will exit with a status of 0 (zero) if the client was able to successfully initialize its
	corresponding client directory on the Ignite-UX server.	A non-zero value is returned if any problem

occurs.

EXAMPLES

Initialize the client using the speci®ed Ignite-UX server: add_new_client -sIgnite-UX_Server

Initialize the client and overwrite existing contents of the client directory on the Ignite-UX server: add_new_client -sIgnite-UX_Server-f

Initialize the client using the speci®ed Ignite-UX server, for target OS release B.11.23: add_new_client -sIgnite-UX_Server-RB.11.23

Initialize the client using the speci®ed Ignite-UX server to use NFS as the default ®le sharing service for the load®le :

add_new_client -s Ignite-UX_Server-n

FILES

/opt/ignite/boot/Rel_release /INSTALLFS /opt/ignite/boot/Rel_release /VINSTALLFS /opt/ignite/boot/Rel_release /WINSTALLFS /opt/ignite/boot/Rel_release /IINSTALLFS

PA-RISC 32-bit, PA-RISC 64-bit (V class), PA-RISC 64-bit (non V class), and Itanium-based ®le systems used by install clients. Con®guration information available at client boot-time is stored in the ®rst 8KB of these ®les. These are the default ®les instl_adm modi®es.

/var/opt/ignite/clients/0xLLA/host.info

File that contains the hardware model and system name of the client.

/var/opt/ignite/clients/0xLLA/hw.info

File containing hardware information about the client such as any information about the hard drives, tape drives, LAN devices, etc. This ®le will be deprecated in a future release and is being replaced by the io.info ®le.

/var/opt/ignite/clients/0xLLA/io.info

File containing hardware information about the client such as any information about the hard drives, tape drives, LAN devices, etc.

/var/opt/ignite/clients/0xLLA/config.sys

File that contains the system information about the clients such as IP address, system name, etc.

/var/opt/ignite/clients/0xLLA/client_name File that contains the name of the client.

/var/opt/ignite/clients/0xLLA/client_status

File containing information about the status of each of the client addition steps.

DEPENDENCIES lanscan (1M)

/opt/ignite/lbin/loadfile /opt/ignite/lbin/rescan_hw_host

2 Hewlett-Packard Company − 2 − HP-UX 11i Version 3: March 2012