Psion Teklogix MLP 3040 Series manual Emulation, Baud Rate, Data Bits, Stop Bits, Parity

Printer Configuration

Emulation

Emulation Printek

Possible Values: Printek*, O’Neil, ZPL-II, Mt3, CPCL, Hex Dump

This feature sets the family of printer commands that may be used by a host application program to control the various capabilities of the printer. The printer will only respond to commands valid for the currently selected emulation. For more information, please refer to the MLP 3040 Series Programmer’s Manual.

Baud Rate

Possible Values: 9600, 19200, 38400, 57600*

Baud Rate 57600

This feature sets the baud rate for the Serial interface. The value must match the setting used on the host system.

Data Bits

Possible Values: 7, 8*

Data Bits 8

This feature sets the number of data bits in the serial character frame. The value must match the setting used on the host system.

Stop Bits

Possible Values: 1*, 2

Stop Bits 1

This feature sets the number of stop bits included in the serial character frame. The value must match the setting used on the host system.

Parity

Possible Values: None*, Even, Odd

Parity

None

This feature sets the parity checking requirements for the data bits in the serial character frame. The value must match the setting used on the host system.

22