Printer Configuration
Entering Setup
To enter Setup, press and hold the 
Enter Button while turning on the printer with the 
Power Button. Continue to hold the Enter Button until “Menus Active” appears on the LCD Display. After releasing the 
Enter Button, “Entering Setup Menus” will be displayed momentarily before advancing to the “FORMAT MENU”. While in Setup Mode, the power indicator will blink slowly.
Selecting Menus
Once Setup Mode has been successfully entered, the “FORMAT MENU” is the first menu displayed. Note that while in Setup Mode, the 
Paper Feed Button now operates as an 
Advance Button. To advance to the INTERFACE MENU or OPTIONS MENU, or to Exit Setup, press the 
Advance Button until the desired menu is displayed. With a few exceptions which are described where appropriate, pressing the 
Advance Button will always advance you to the next menu.
Detailed explanations on how to navigate each of the menus and use their features follow.
Exiting Setup
Setup may be exited by pressing the 
Advance Button until “Exit Setup” is displayed on the top line of the LCD Display, and “Save Changes” is displayed on the bottom line. To save any changes you have made and exit Setup press the 
Enter Button. If feature values were changed, “Exiting Menus Saving Changes” will be displayed. If no values where changed, “Exiting Menus No Changes” will be displayed.
If you do not want to save the changes you have made, press the 
Increment Button to display “Discard Changes” on the bottom line and then press the 
Enter Button. “Exiting Setup No Changes” will be displayed.
After Setup is exited and any changes saved, the printer will reset and reinitialize itself to adopt any changes that may have been made. Note that when this reset occurs, any data that may have been in the input buffer will be discarded.
15
