DeWalt WP54AG manual 191

WLAN State

SYNTAX	DESCRIPTION
Get wlanstate	Display whether status of current wireless operation is Enabled or
	Disabled.
Set wlanstate enable/disable	Set to Disable to turn off wireless operation.
	Set to Enable to turn back on wireless operation.
	Note:
	When executing this command, please ensure that you are not
	connected on wireless with device or you will be disconnected from
	the device and network.
	The wireless operation can only be Enabled from the Ethernet port or
	UTP cable connection to device.
Reset Button
SYNTAX	DESCRIPTION
Get buttonpassreset	Display the status of Reset Button operation.
	If status is (Enabled), resetting of password by pressing Reset Button is
	allowed.
	If status is (Disabled), resetting of password by pressing Reset Button is
	not allowed.
Set buttonpassreset enable/disable	Set to Disable to prevent resetting of password by pressing Reset
	button.
	Set to Enable to allow resetting of password by pressing Reset button.

191