ANTENNA ALIGNMENT
(AVAILABLE FOR ALL MODES )
The Antenna Alignment feature in the access point is designed to precisely align the antenna over such a long distance so that the connectivity communication between your access point and another remote or neighbouring access point could be improved as indicated by higher signal strength.
Step 1:
Click on WLAN Setup from the CONFIGURATION menu. You will see the sub- menus expanded under WLAN Setup. Click on Antenna Alignment. The Antenna Alignment page can act as a diagnostic tool to check the communication with a remote device. The remote AP MAC Address is preset to all zeros by default.
Step 2:
If you wish to specify the MAC address of the remote AP, key in the field next to Remote AP Address (option), followed by executing the Start button. Then the
If there is no specified AP with its MAC address you have keyed in, the screen below will show on the right. To abort or key in the MAC address of the other available remote AP, click on the Stop button.
50
