Chapter 8: Security Configuration
!
This chapter describes the security configuration mainly found in the Wireless Routing Client and Gateway modes.
PACKET FILTERING
As part of the comprehensive security package found on the access point, you may perform IP packet filtering to selectively allow/disallow certain applications from connecting to the Internet.
TO CONFIGURE PACKET FILTERING
Step 1:
Under the Security Configuration command menu, click on Packet Filtering.
Step 2:
You must first choose the Packet
Filter Type by clicking on the
Change button.
Step 3:
Select from three choices: Disabled, Sent, Discarded, and then click on the Apply button. The default is Disabled, which allows all packets to be sent.
150
