WLAN SETUP
This section shows how to perform the following functions:
Basic:
This function performs a basic setup of the wireless modes of operation: Access Point mode, Access Point Client mode and other operating modes.
Security:
This function performs data encryption and protection for the access point.
Kindly refer to Chapter 5 on WLAN Security for details.
Advanced:
This function furthers the basic configuration of the access point by setting the system’s additional parameters: Wireless Pseudo VLAN, WDS Configuration and Long Distance Parameters.
Kindly refer to Chapter 6 on Wireless Extended Features for details.
Statistics:
This function uses the Scan Feature to monitor and interpret the statistics data collected.
MAC Filtering (only applicable to Access Point mode):
MAC Filtering acts as a security measure by restricting the users accessing to the network through their MAC address.
Antenna Alignment:
It is a tool for aligning outdoor antenna between 2 access points over long distances. The signal level can be checked from the web page and also from the DIAG LED indicator.
35
