Manual Transmission (ADF)

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax.

1Insert the document in the feeder or on the scanner glass.

2Press Hook for a dial tone.

3Enter the fax number you want to call (you can enter the digits using the dial pad, or you can enter a One Touch or Speed Dial number or you can call from the Tel-index). (See Auto Dial Numbers and Dialing Options, page 7-1.)

4When you hear the fax tone, press Start .

5 Press 1 to begin sending.

1.SEND 2.RECEIVE￿

 

￿

Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the number.

If you’re sending a fax automatically (using the ADF) and the line is busy, the MFC will automatically redial up to three times at 5 minute intervals.

Dual Access

If the document feeder is empty, you can place a document in the feeder and set temporary settings, dial a number, and begin scanning the fax into memoryeven when the MFC is receiving a fax, sending a fax, or printing a fax from memory. The screen displays the new job number and available memory.

You cannot use Scan Fax when the MFC is sending, receiving or printing a fax.

If you get a MEMORY FULL message while scanning the first page of a fax press Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the operation.

The number of documents you can scan into memory varies with the data they contain.

S E T U P S E N D

6 - 5

Page 63
Image 63
Brother MFC-9100C manual Manual Transmission ADF, Manual and Automatic Fax Redial, Dual Access, Send 2.RECEIVE