Setting Up Groups for Broadcasting

Groups allow you to send the same fax message to many fax numbers by pressing only one One Touch Group key (and Start ). First, you’ll need to store each fax number as a One Touch or Speed Dial number. Then, you can combine them into a Group. Each Group uses up a One Touch key. Finally, you can have up to six small Groups, or you can assign up to 115 numbers to one large Group. (See Broadcasting, page 7-5.)

You can include up to 16 One Touch numbers, and up to 100 Speed Dial numbers. If you broadcast to more than the maximum locations available, you will be unable to set up transmissions using Dual Access and the Timer.

(See Storing One Touch Dial Numbers, page 7-1 and Storing Speed Dial Numbers, page 7-2.)

1

Press Function , 1 , 5 , 3 .

 

2 Select a One Touch key where you

SELECT ONE-TOUCH

 

wish to store the Group number.

 

 

For example, press One Touch

 

 

key 02 for Group 1.

 

3

Use the dial pad to enter the Group number

SETUP GROUP:GO￿

 

and press Set .

￿

For example, press 1 for Group 1.

4To include One Touch or Speed Dial numbers in the Group, enter them as if you were dialing. For example, for One Touch key 05 , press One Touch key 05 . For Speed Dial location 09,

press Speed Dial , then press 0 ,

9

on the

G01:*O5#O9

dial pad. The display shows

 

05, #09.

 

 

 

5When you’re finished adding numbers, press Set .

6 Use the dial pad and the chart on page 4-2

NAME:￿

to enter a name for the group and press Set .

ENTER & SET

For example, NEW CLIENTS

 

7Press Stop to exit.

You can print a list of all One Touch and Speed Dial numbers. (See Chapter 9, Printing Reports.)

If you lose electrical power, numbers stored in memory will not be lost.

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S

7 - 3

Page 73
Image 73
Brother MFC-9100C manual Setting Up Groups for Broadcasting, Select ONE-TOUCH, Setup Groupgo