Brother MFC-9100C manual Storing Speed Dial Numbers, Changing One Touch and Speed Dial Numbers

Storing Speed Dial Numbers

You can store Speed Dial numbers, so you can dial by pressing only three keys (and Start ). There are 100 Speed Dial locations. (See Speed Dialing, page 7-4.)

1 Press Function , 1 , 5 , 2 .

2Use the dial pad to enter a two-digit location (00–99) and pressSet .

3Enter the number (up to 20 digits) and press Set .

4Use the dial pad to enter the name (up to 15 characters) and press Set .

You can use the chart on page 4-2 to help you enter letters—OR—Press Set to store the number without a name.

SPEED-DIAL? #￿

￿

#05:￿

￿

NAME:

5Press or to select the type of number and press Set :

FAX	a fax number
TEL	a telephone (voice) number
FAX/TEL	both fax and telephone number

6Return to Step 2 to store another Speed Dial number—OR—Press Stop to exit.

Even if you lose electrical power, numbers stored in memory will not be lost.

Changing One Touch and Speed Dial Numbers

If you try to store a One Touch or Speed Dial number in a location where a number is already stored, the screen displays the current name stored there, then prompts you to either

1.CHANGE 2.EXIT

1Press 1 to change the number, or press 2 to exit without changing it.

2Enter a new number and press Set .

■If you want to erase the number, press Clear when the cursor is to the left of the digits.

■If you want to change a digit, use or to position the cursor under the digit you want to change, then type over it.

3Follow the directions from Step 4 for Storing One Touch Numbers or Storing Speed Dial Numbers.

7 - 2 A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S