Using the FaxSpeed Macro
To send the current document in your word processor di- rectly to FaxSpeed:
1Open your word processor application, and open or create the required document.
2Select the Run FaxSpeed option from the File menu. The current file will be generated into an InfoImage. Then the FaxSpeed Setup dialog box will appear.
3Specify the required settings in this dialog box.
4To change additional settings, select the Fax/Printer… button. The FaxSpeed Setup dialog box will appear. Select Brother MFL Pro Fax as the driver.
5Select OK to send the InfoImage to
How to Read an InfoImage that Was Printed at Your MFC
If your system is set up to print received faxes at the MFC, the incoming InfoImage will be printed at the MFC. To read the printed InfoImage, you must first scan it into your computer so FaxSpeed can read the file.
Follow these steps when a received InfoImage printed at the MFC:
1After the InfoImage is received and printed by the MFC, place the printed InfoImage page(s) into the MFC’s document feeder.
2On your computer, open FaxSpeed Read module and select
the
•As each page is scanned, FaxSpeed shows you how many InfoImage blocks have been read and how many are still unread.
FaxSpeed will not accept a page from a different InfoImage.
3After all the pages of the InfoImage have been scanned, FaxSpeed automatically retrieves and decompresses the original files from the InfoImage and saves them in a Log file.
4You can save each retrieved fax as a file.
Even though the list of files and their content can be viewed, the actual files represented by the InfoImage are not saved unless you have saved them to disk.
19 - 6 | C O L O R F A X I N G |
