7Each color has its own

correct position. Gently insert the Black ink cartridge, matching the color of the cartridge covers. Please be careful not to press down on the cartridge sensor (see illustration) when inserting a cartridge.

8Repeat Steps 5–7 to install each color ink cartridge.

9Close the cartridge covers until they click into place.

Cartridge Sensor

10After installing all ink cartridges, close the scanner cover. Your MFC now prepares for a “head cleaning” and goes online so it can set the ink dot counter. The MFC will ask you if you changed each color ink cartridge.

DID YOU CHANGE￿ BLCK?1.YES 2.NO

11Press 1 on the dial pad for each color, as prompted (for initial setup only) within 1 minute. The MFC will enter a cleaning cycle for approximately 6 minutes. The screen alternately displays CLEANING BLACK and PLEASE WAIT. The ink dot counter will be set automatically for each color, so the MFC can warn you with an error message when ink is running low.

Make sure paper is loaded in the cassette, then press Start within 1 minute.

When the MFC completes the cleaning cycle, the MFC starts printing the test sheet.

2 - 10

A S S E M B L Y A N D C O N N E C T I O N S

Page 32
Image 32
Brother MFC-9100C manual Did YOU Change BLCK?1.YES 2.NO