8
Remote Fax Options
Paging and Fax Forwarding
You cannot use Paging and Fax Forwarding at the same time.
To use Paging or Fax Forwarding you must set Fax Storage to ON.
Programming a Paging Number
When Paging is selected, your MFC dials the pager number you’ve programmed, and dials your Personal Identification Number (PIN) when connected, to activate your pager and let you know you have a fax message in the memory.
1 | Press |
| Function , | 1 | , | 7 | , | 1 . |
|
|
| ||
2 | Press |
|
| or |
| until the screen displays | PAGING? | ||||||
| PAGING? and press Set . |
|
|
| |||||||||
3 | Enter your pager phone number | PAG#: | |||||||||||
| (up to 20 digits) followed by | and |
| ||||||||||
| press Set . Do not include the area code | ENTER & SET | |||||||||||
| if it is the same as that of your MFC. |
| |||||||||||
| For example, |
|
|
|
|
|
|
| |||||
| 1 | 8 | 0 | 0 | 5 | 5 | 5 | 1 | 2 | 3 | 4 | . |
|
4If your pager requires a PIN, enter the PIN, press 
, press Redial/Pause , enter
your MFC telephone number followed by 
and press Set .
For example, 1 2 3 4 5 | Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 | . |
— OR—
If you do not need a PIN, press Redial/Pause , enter the fax number of your
MFC, then press 
and press Set . For example,
Redial/Pause | 1 | 8 | 0 | 0 | 5 | 2 | 1 | 2 | 8 | 4 | 6 | . |
5Press Stop to exit.
You cannot change a Paging number or PIN remotely.
Press Redial/Pause for each 3.5 second delay, as needed.
R E M O T E F A X O P T I O N S | 8 - 1 |
