SETUP RECEIVE
5 - 4
Advanced Receiving Operations

Operation from Extension Telephones

If you answer a fax call on an extension phone (or on an external phone in
the EXT. jack), you can make your MFC take over by using the Fax
Receive Code. When you press the Fax Receive Code
5
1
, the MFC
starts to receive a fax. (See Easy Receive, page 5-2.)
If you answer a call at an extension or external phone, and no one is on the
line, assume you’re receiving a fax. At an extension phone, press
5
1
, wait for fax receiving tones (chirps), then hang up. At an
external phone, press
5
1
and wait for the phone to be disconnected
(the screen displays RECEIVING) before you hang up. (Your caller will
have to press
Start
to send the fax.)
Changing the Fax Receive Code
The preset Fax Receive Code (
5
1
) may not work with some
telephone systems.
If you are always disconnected when accessing your external TAD
remotely, try changing the Fax Receive Code from
5
1
to .
1
Press
Function
,
1
,
2
,
4
.
2
Press or to select ON (or OFF) REMOTE ACT.:ON?
and press
Set
.
3
If you want to, enter a new Fax Receive
FAX RECEIVE:

*

51
Code and press
Set
.
4
Press
Stop
to exit.

Printing a Fax in Memory

If you have Fax Storage ON for remote retrieval, you can still print a
fax from memory when you are at your MFC. (See Setting Fax Storage,
page 8-2.)
1
Press
Function
,
1
,
7
,
4
.
2
Press
Start
.
3
After printing is finished, press
Stop
to exit.