1Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
2Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
3Do not use the telephone to report a gas leak in the vicinity of the leak.
Paper
The quality of your document can be affected by the kind of paper you use in the MFC. You can use plain paper, coated paper, transparencies, glossy paper, organizer paper, and envelopes. We recommend testing various paper types before purchasing large quantities. For best results, use genuine Brother special coated paper, glossy paper, and transparencies. (See page ii for information about ordering Brother accessories.)
When you print on coated paper, transparencies, and glossy paper, be sure to select the correct media in the “Quality/Color” tab in the printer driver. When using coated paper or transparencies, avoid stacking by removing each page after it exits the machine.
About Brother Paper
Brother paper is manufactured specifically for this MFC, to provide you optimum print quality:
Quality Coated Paper for 360 dpi Color Ink Jet
High Quality Coated Paper for 720 dpi Color Ink Jet printing— super fine mode (BP72CL for letter)
Color Ink Jet Transparencies— fine mode (BPTRL for letter)
Color Ink Jet Glossy Paper— superfine mode (BPGLL for letter)
■Brother coated (ink jet) paper is coated only on one side. Make sure this whiter (coated) side is face down when loading in the paper cassette, or manual feed slot.
■The coated side of glossy paper is shiny. Do not touch the shiny side. Load glossy paper in the paper cassette with the shiny side facing down.
■Do not touch either side of transparencies, because perspiration is absorbed easily and may decrease output quality.
■For optimum output quality, use paper that is appropriate for your resolution setting.
■Store paper in the original bag, and keep it sealed. Keep paper flat and away from moisture, direct sunlight and heat.
A S S E M B L Y A N D C O N N E C T I O N S | 2 - 3 |
