TO CONFIGURE VIRTUAL SERVERS BASED ON IP FORWARDING
When you have subscribed for more than one IP address from your ISP, you may define Virtual Servers based on IP Forwarding for which all Internet requests, regardless of ports, are forwarded to defined computers in the private network. If you require more information of its function, please refer to the NAT Technology Primer on the Product CD. Here are the steps to set it up:
Step 1:
Under the CONFIGURATION command menu, click on NAT. You will find the Advanced NAT Options available near the bottom of the page.
Step 2:
Click the IP Forwarding button to configure Virtual Servers based on IP Forwarding.
Step 3:
At the next screen Add IP Forward Entry, you have to specify a Private IP Address and a Public IP Address. In this example, we would like all requests for 213.18.213.101 to be forwarded to a PC with Private IP Address 192.168.168.55.
Step 4:
Click the Add button to continue.
Step 5:
The IP Forward Entries page will
reflect your new addition.
NOTE
For step 3 above, please ensure that you have subscribed to the Public IP Address you intend to forward from.
129
